USB Camera (Full Version) MOD APK v12.3.2

USB Camera MOD APK is a video utility that connects an Android device to a USB webcam or video capture card through USB-OTG. You can record video, take snapshots, use the device as a wireless IP camera, or send a live feed to media servers.

The app works as a userspace driver for its own functions. Android does not allow kernel drivers to be installed, so this USB device access is not available to third-party apps.

USB devices and capture hardware

USB Camera MOD APK supports UVC webcams with a microphone, external USB audio input, and UVC video grabbers with audio input. Supported video formats include H.264, H.265, HEVC, MJPG, YUY2, P010, and NV12.

UVC capture hardware can accept HDMI input up to 4K and supports progressive as well as interlaced video. The app also supports Windows Hello cameras, IR cameras, Geek szitman supercamera devices with the 2ce3:3828 identifier, and non-UVC hardware such as USB endoscopes.

Supported EasyCap hardware

• EasyCap devices with audio using UTV007, HTV600, or HTV800 chipsets with VID_1B71 and PID_3002 are supported.
• EasyCap devices using STK1160 with SAA7113 or GM7113 and AC97 are supported in the 48 kHz stereo VID_05E1 and PID_0408 version.
• EasyCap devices using STK1160 with SAA7113 or GM7113 are supported in the 8 kHz mono VID_05E1 and PID_0408 version.
• EasyCap devices using EM2860 with SAA7113 or GM7113 and AC97, identified as VID_EB1A and PID_2861, are supported.
• EasyCap devices using SMI2021 with SAA7113 or GM7113 and ES7240 or CS5340 are supported for the listed VID_1C88 product identifiers.

Use a good-quality OTG cable and ensure that the connected hardware has adequate power. Some devices, including Elgato Cam Link and ezcap Video Grabber hardware, may need a bridge hub to strengthen USB signals.

Recording and video overlays

You can record incoming video and capture snapshots from the connected camera. USB Camera MOD APK can combine USB audio with the built-in microphone or system audio, and it can overlay built-in camera or screen video on the external camera feed.

During recording, the app can add a timestamp, GPS position, speed, and other information to video frames. Position and speed overlays can be configured separately, long text can be animated, and animated GIF or WebP images can be used as watermarks.

Video overlays can also appear in the video preview, with an option in Settings to turn that preview display off. You can use a headset, Bluetooth headset, or a webcam snapshot button to take a snapshot and control video recording.

Loop recording and background operation

Loop recording can split recordings into automatic segments and delete older video archives when storage is insufficient. This allows USB Camera MOD APK to be used as a dash cam.

The app can switch between foreground and background operation from the menu without interrupting an active recording. Motion detection can start video recording automatically, upload the recorded video to an FTP server, and send an email notification.

IP camera and live streaming

USB Camera MOD APK can turn the phone into a wireless IP camera through its built-in RTSP, RTSPS, HTTP, and HTTPS server. You can view the feed in a browser or with the IP Camera app, while bi-directional audio requires the IP Camera app.

The IP Camera Server supports TLS. You can add a PFX or P12 certificate to enable HTTPS and RTSPS connections.

For live broadcasting, the app can push video and audio to RTMP or SRT media servers, including multiple servers at the same time. RTMPS and SRT are supported, along with HEVC and AV1 over RTMP; YouTube Live is currently supported for this use.

Viewing modes and requirements

USB Camera MOD APK supports Side by Side viewing for use with FPV goggles. It can connect multiple devices, display video on the lock screen, and work with UVC H.264 hardware.

HEVC recording or streaming requires Android 5.0 or later and a device with HEVC codec support. AV1 streaming requires Android 10 or later and a device with AV1 codec support.

On Android 9 and later, camera permission is required for full access to USB video devices. The minimum Android requirement for this build is Android 11 or later.

What this build changes

This build is labeled Full Version.

This build fits people connecting a USB webcam, capture card, EasyCap device, or FPV setup to an Android 11 or later device. It also suits users who need local recording, an IP camera feed, or RTMP and SRT output from the same app. Pass on it if your phone cannot meet the Android 11 minimum, or if your intended hardware needs a connection arrangement you cannot supply with OTG power and, where needed, a bridge hub.

Inside this build

The modification is labeled Full Version. USB Camera MOD APK retains its documented USB device connections, recording controls, overlays, IP camera server, and streaming options. Its Android requirement remains Android 11 or later, while HEVC and AV1 use also depend on the relevant device codec support.

Strengths

• It connects UVC cameras and capture cards through USB-OTG for recording or live video work.
• RTMP and SRT output support lets you send video and audio to compatible media servers.
• Loop recording can segment files and remove older archives when available storage becomes limited.
• TLS certificate support enables HTTPS and RTSPS connections through the built-in IP Camera Server.

Trade-offs

• The build requires Android 11 or later, which excludes devices running earlier Android versions.
• HEVC and AV1 features require both their stated Android level and matching hardware codec support.
• Some capture hardware needs reliable OTG power or a bridge hub before it operates properly.

Bottom line

Install it when your Android 11 or later device and USB video hardware match the supported setup. Check the Android version first, then confirm any HEVC, AV1, or capture-card requirements that apply to your use.